レガシー製品

5 軸技術

User guide: REVO [en]

User guide: REVO

REVO is a dynamic measuring head and probe system from Renishaw. It is a revolutionary product designed to maximise measurement throughput whilst maintaining high system accuracy.
[2.8MB]
Installation & user's guide: SFP1 [en]

Installation & user's guide: SFP1

No description available
[1.6MB]
Data sheet: SFM-C2 [en]

Data sheet: SFM-C2

Enhanced access and inspection capability for integrated surface finish measurement
[150kB]

3 軸技術

Installation guide: PH10 [en]

Installation guide: PH10

PH10 motorised probe heads and controllers installation guide
[2.6MB]
Installation guide: PHS1 [en]

Installation guide: PHS1

The Renishaw servo positioning head (PHS1) is a 2-axis motorised head with continuous 360° servo drive enabling the probe configuration to be positioned at almost any angle. This makes the head ideal for use in restricted spaces and enables styli to be angled normal to a surface or aligned to the axis of a hole.
[1.6MB]
User guide: PHS1 [en]

User guide: PHS1

The Renishaw servo positioning head (PHS1) is a 2-axis motorised head with continuous 360° servo drive enabling the probe confi guration to be positioned at almost any angle. This makes the head ideal for use in restricted spaces and enables styli to be angled normal to a surface or aligned to the axis of a hole.
[1.4MB]

タッチトリガープローブ

User guide: Touch-trigger probe systems - TP1, TP2, TP6, TP6A, PH1, PH5, PH6, PH6M [en]

User guide: Touch-trigger probe systems - TP1, TP2, TP6, TP6A, PH1, PH5, PH6, PH6M

No description available
[475kB]

プローブインターフェース

Installation guide: PI 200 [en]

Installation guide: PI 200

The TP200 probe system comprises the TP200 probe sensor and stylus module, the PI 200 interface and the optional SCR200 stylus change rack.
[1.8MB]
Installation guide: PI 4-2 [en]

Installation guide: PI 4-2

The PI 4-2 is a basic probe interface for use with Renishaw’s conventional touch‑trigger probes (TP1, TP20, TP6, MH20i etc.). It is suitable for use on both manual and direct computer control (DCC) co-ordinate measuring machines (CMMs).
[930kB]
Installation guide: PI 7-2 [en]

Installation guide: PI 7-2

Installation guide for the PI 7-2 interface for Renishaw's TP7M probe
[604kB]

測定機用コントローラおよびアンプ

Installation guide: UCC1 [en]

Installation guide: UCC1

The Renishaw UCC1 controller is designed to link a CMM host computer to the hardware of a CMM. The controller can provide services to the component parts of a CMM system.
[910kB]
Installation guide: UCClite-2 and UCClite [en]

Installation guide: UCClite-2 and UCClite

The UCClite-2 is an addition to the Renishaw CMM controller product range. Utilising the UCC1 platform introduced in 1997, the UCClite-2 offers similar system performance and capability.
[2.7MB]
Installation guide: UCC2 [en]

Installation guide: UCC2

The UCC2 is a further development in Renishaw’s CMM controller product range. Building on the UCC1 platform introduced over five years ago, the UCC2 offers additional capability and system performance.
[1.5MB]
Installation guide: UCC T3 (UCCFusion) [en]

Installation guide: UCC T3 (UCCFusion)

No description available
[2.1MB]
User guide: HCU1 motorised probe head - hand control unit [en]

User guide: HCU1 motorised probe head - hand control unit

HCU1 is a hand control unit for use with the Renishaw range of PH10 motorised head systems.
[242kB]
Installation guide: SPA1 [en]

Installation guide: SPA1

SPA1 servo power amplifier installation guide
[1.0MB]
Installation guide: SPA1 servo tuning [en]

Installation guide: SPA1 servo tuning

No description available
[856kB]
Installation guide: SPA2 [en]

Installation guide: SPA2

No description available
[1013kB]
Installation guide: PHC10-3 [en]

Installation guide: PHC10-3

No description available
[882kB]

現行製品については、マニュアルおよびインストレーションガイドのダウンロードのページをご覧ください。