光学式エンコーダの診断ツール
レニショーでは、エンコーダシステムのセットアップの最適化とリモートキャリブレーションに活用できる各種診断ツールを用意しています。
光学式エンコーダの診断ソフトウェア
ADT View
-
ソフトウェアダウンロード: ADT View ソフトウェアバージョン3.8.0.0 [en]
ADT View はキャリブレーションや診断に活用できる包括的なフィードバックを VIONiC™、QUANTiC™、ATOM DX™、RESOLUTE™、EVOLUTE™、FORTiS™ エンコーダシステムからリアルタイムに取得します。このソフトウェアは、ADTi-100 と一緒に使う必要があります。このハードウェアの購入については、レニショーまでお問い合わせください (パーツ No. A-6195-0100)。このハードウェアは USB ケーブルで Windows® タブレットまたは PC に接続するか、接続機器にインライン接続します (インライン接続は ADTi-100 のみ)。
参考情報
バージョン: 3.8.0.0
リリース日: 2020 年 10 月
概要: QUANTiC インクリメンタルエンコーダの新アナログタイプ追加、バグの修正、操作性向上
改善点:
- QUANTiC の各アナログタイプに完全対応
- インクリメンタルエンコーダの対応型式 (パーツ No.) 拡大
- 操作性およびインターフェースの改善
-モードを変更しても喪失しない設定の追加
-インストール処理の改善
-リサジュグラフの精度と視認性の改善
本リリースで既知の問題:
- 古いままの用語や、言語設定を変更しても英語のままの用語があります。
- QUANTiC のアナログタイプからデータを .CSV ファイルに保存すると、分解能が記載されません。また、記載されるものの、有効ではない項目もあります。
ATOM™ 診断ソフトウェア
-
ATOM™ diagnostic software version 1.0 [en]
ATOM diagnostic software can be used to optimise the installation of ATOM encoders and provide a quick and comprehensive system calibration. The software must be used in conjunction with the ATOM diagnostic hardware which can be purchased from Renishaw using part number A-9411-0011. The hardware can be connected to the PC via the USB cable (provided in the kit) or in-line with our customers’ electronics.
-
ATOM™ diagnostic software version 1.0 [en]
ATOM diagnostic software can be used to optimise the installation of ATOM encoders and provide a quick and comprehensive system calibration. The software must be used in conjunction with the ATOM diagnostic hardware which can be purchased from Renishaw using part number A-9411-0011. The hardware can be connected to the PC via the USB cable (provided in the kit) or in-line with our customers’ electronics.
TONiC™ 診断ソフトウェア
-
TONiC™ diagnostic software version 1.0 [en]
TONiC diagnostic software can be used to optimise the installation of TONiC encoders and provide a quick and comprehensive system calibration. The software must be used in conjunction with the TONiC diagnostic hardware which can be purchased from Renishaw using part number A-9411-0011. The hardware can be connected to the PC via the USB cable (provided in the kit) or in-line with our customers’ electronics.
-
TONiC™ diagnostic software version 1.0 [en]
TONiC diagnostic software can be used to optimise the installation of TONiC encoders and provide a quick and comprehensive system calibration. The software must be used in conjunction with the TONiC diagnostic hardware which can be purchased from Renishaw using part number A-9411-0011. The hardware can be connected to the PC via the USB cable (provided in the kit) or in-line with our customers’ electronics.