ＲＰ３現在、このページはご希望の言語でご利用いただけません。 Google 翻訳を使用すると自動翻訳でページを表示できます。 弊社はこのサービスの提供に責任を持たず、翻訳結果を弊社でチェックすることはありません。
さらにサポートをご希望の場合は、弊社までお問い合わせください。  RP3 tool setting probe for HPRA, HPPA and HPMA arms.
The RP3 is also suitable for OEM installation into purpose-built holders. About RP3
 The RP3 probe is suitable for OEM installation into purpose-built holders, or for use with Renishaw''s automatic or manual tool setting arms.
A robust 5-way probe for tool setting and some inspection applications. Advanced design has produced an extremely small probe with 1µm repeatability and large over-travel.
The MI 8-4 interface is required for use with the RP3 hard-wired probe.
RP3 features and benefits
-
1 µm repeatability
-
Compatible with the full range of Renishaw M4 styli
-
Standard fit HP series toolsetting arm (HPRA, HPPA and HPMA)
-
Flexibility - OEM kit available for OEM installations
-
Large 9° of over-travel - increases the durability of the probe
RP3 specification
| Specification |
|
| Sense directions |
±X, ±Y, +Z |
| Weight |
80 g (3 oz) |
| Uni-directional repeatability (max 2 sigma at stylus tip) |
1.0 µm (0.00004 in) |
|
Trigger force
XY plane - lowest force
XY plane - highest force
+Z direction |
1.5 N (5.3 ozf)
3.5 N (12.3 ozf)
12.0 N (42.3 ozf) |
|
Stylus overtravel
XY plane
+Z direction |
±9°
2 mm (0.08 in) |
| Recommended stylus length |
48.75 mm (1.90 in) |
| Sealing |
IP X8 |
| Mounting |
Refer to user's guide for customer integration details. |
|
Compatible interface |
MI 8-4 |
RP3 ordering information
| Part Number |
Description |
| A-2197-0049 |
RP3 probe |
| A-2197-0007 |
RP3 OEM Kit | Lathe tool setting HP tool setting arms  High precision manual and motorised tool setting arms for turning centres.
| 